Evaluation of the Efficiency of a Multilayer Photocatalyst in the Removal of Methylene Blue

Document Type : Original Research Article

Authors

1 Department of Environmental Engineering, Faculty of Natural Resources and Environment, University of Birjand, Birjand, Iran

2 Department of Civil Engineering, Faculty of Engineering, University of Birjand, Birjand, Iran

3 Department of Environmental Science, Faculty of Natural Resources and Environment, Shahid Bahonar University of Kerman, Kerman, Iran

Abstract

This study developed a two-layer structured photocatalyst, featuring a magnetic nickel core and a shell composed of a tin-based semiconductor and carbon nitride. The composite core was synthesized using a green approach, leveraging rosemary plant extract. A notable advantage of this photocatalyst is forming a floating layer through a gelation process, facilitated by freeze-drying, which creates internal pores. These pores not only enhanced the floatability of the structure but also improved light penetration into the nanoparticles, thereby increasing the photocatalytic efficiency of the synthesized composite. Structural characterization of the nanoparticles, including FESEM, XRD, EDX, and FTIR analyses, confirmed the successful synthesis of the proposed photocatalyst. FESEM analysis revealed that the average particle diameter was less than 1.5 micrometers. The photocatalyst's performance was assessed in a continuous reactor under UV irradiation for methylene blue degradation across varying conditions: pH levels (3, 5, 7, 9, and 11), catalyst dosages (0.2, 0.4, 0.6, 0.8, and 1 g/L), and initial dye concentrations (10, 20, 30, 40, and 50 mg/L). Optimization studies identified the optimal conditions for photocatalysis as a pH of 11, a photocatalyst dosage of 0.6 g/L, and an initial dye concentration of 50 mg/L. Under these conditions, the methylene blue removal efficiency reached 82%. Furthermore, reusability studies demonstrated that the core structure of the photocatalyst retained its essential properties and effectiveness in removing organic pollutants even after five reuse cycles.

Keywords

Main Subjects

References

Alijani, H.Q., Pourseyedi, S., Torkzadeh-Mahani, M., Seifalian, A. & Khatami, M., 2020. Bimetallic nickel-ferrite nanorod particles: greener synthesis using rosemary and its biomedical efficiency. Artificial Cells, Nanomedicine, and Biotechnology, 48, 242-251.
Bameri, I., Saffari, J., Baniyaghoob, S. & Ekrami-Kakhki, M.-S., 2022. Synthesis of magnetic nano-NiFe2O4 with the assistance of ultrasound and its application for photocatalytic degradation of Titan Yellow: Kinetic and isotherm studies. Colloid and Interface Science Communications, 48, 100610.
Chong, M.N., Jin, B., Chow, C.W. & Saint, C., 2010. Recent developments in photocatalytic water treatment technology: a review. Water Research, 44, 2997-3027.
Daliri, M., Sayadi, M.H. & Hajiani, M., 2024. Developing the glycerol carbonylation process using photocatalysis and 2-cyanopyridine as a water-reducing agent. Sustainable Earth Trends, 4(4), 73-82.
Dalponte, I., De Sousa, B.C., Mathias, A.L. & Jorge, R.M.M., 2019. Formulation and optimization of a novel TiO2/calcium alginate floating photocatalyst. International Journal of Biological Macromolecules, 137, 992-1001.
Faraji, A., Mehrdadi, N., Mahmoodi, N.M., Baghdadi, M. & Pardakhti, A., 2021. Enhanced photocatalytic activity by synergic action of ZIF-8 and NiFe2O4 under visible light irradiation. Journal of Molecular Structure, 1223, 129028.
Fila, D., Hubicki, Z. & Kołodynska, D., 2022. Applicability of new sustainable and efficient alginate-based composites for critical raw materials recovery: General composites fabrication optimization and adsorption performance evaluation. Chemical Engineering Journal, 446, 137245.
Hajiani, M., Ezami, E. & Rezaei, M.R., 2022a. Photodegradation of Human Serum Albumin by Fe3O4/ZnO/Ag Nanocomposite. Journal of Water and Environmental Nanotechnology, 7(2), 132-142.
Hajiani, M., Gholami, A. & Sayadi, M.H., 2022b. Removal of pharmaceutical pollutants from aquatic environments using heterogeneous photocatalysis. Advances in Environmental Technology, 8(4), 271-278.
Hajiani, M., Sayadi, M.H., Mozafarjalali, M. & Ahmadpour, N., 2023. Green synthesis of recyclable, cost-effective, chemically stable, and environmentally friendly CuS@ Fe3O4 nanoparticles for the photocatalytic degradation of dye. Journal of Cluster Science, 34(4), 1939-1951.
Huang, S., Xu, Y., Xie, M., Xu, H., He, M., Xia, J., ... & Li, H., 2015. Synthesis of magnetic CoFe2O4/g-C3N4 composite and its enhancement of photocatalytic ability under visible-light. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 478, 71-80.
Huang, X. H., Hu, T., Bu, H., Li, W. X., Li, Z. L., Hu, H. J., ... & Jiang, G.B., 2021.Transparent floatable magnetic alginate sphere used as photocatalysts carrier for improving photocatalytic efficiency and recycling convenience. Carbohydrate polymers, 254, 117281.
Jbeli, A., Hamden, Z., Bouattour, S., Ferraria, A.M., Conceicao, D.S., Ferreira, L.V., ... & Boufi, S., 2018. Chitosan-Ag-TiO2 films: an effective photocatalyst under visible light. Carbohydrate polymers, 199, 31-40.
Ji, M., Di, J., Liu, Y., Chen, R., Li, K., Chen, Z., ... & Li, H., 2020. Confined active species and effective charge separation in Bi4O5I2 ultrathin hollow nanotube with increased photocatalytic activity. Applied Catalysis B: Environmental, 268, 118403.
Juang, R.-S., Lin, S.-H. & Hsueh, P.-Y. 2010. Removal of binary azo dyes from water by UV-irradiated degradation in TiO2 suspensions. Journal of Hazardous Materials, 182, 820-826.
Khosravi Mohammad Soltan, F., Hajiani, M., & Haji, A., 2021. Nylon-6/poly (propylene imine) dendrimer hybrid nanofibers: An effective adsorbent for the removal of anionic dyes. The Journal of The Textile Institute, 112, 444-454.
Koyuncu, I. 2002. Reactive dye removal in dye/salt mixtures by nanofiltration membranes containing vinylsulphone dyes: effects of feed concentration and cross flow velocity. Desalination, 143, 243-253.
Kumar, J.V., Ajarem, J.S., Allam, A.A., Manikandan, V., Arulmozhi, R., & Abirami, N., 2022. Construction of SnO2/g-C3N4 an effective nanocomposite for photocatalytic degradation of amoxicillin and pharmaceutical effluent. Environmental Research, 209, 112809.
Larosa, C., Salerno, M., de Lima, J.S., Meri, R.M., da Silva, M.F., de Carvalho, L.B. & Converti, A., 2018. Characterisation of bare and tannase-loaded calcium alginate beads by microscopic, thermogravimetric, FTIR and XRD analyses. International journal of biological macromolecules, 115, 900-906.
Lee, J. & Kwon, K.H. 2023. Considering the risk of a coloring shampoo with the function of gray hair cover cosmetology and skin barrier: A systematic review. Health Science Reports, 6, e1271.
Lima, E.C., Royer, B., Vaghetti, J.C., Simon, N.M., da Cunha, B.M., Pavan, F.A., ... & Airoldi, C., 2008. Application of Brazilian pine-fruit shell as a biosorbent to removal of reactive red 194 textile dye from aqueous solution: kinetics and equilibrium study. Journal of Hazardous Materials, 155(3), 536-550.
Mallakpour, S., Behranvand, V. & Mallakpour, F., 2019. Synthesis of alginate/carbon nanotube/carbon dot/fluoroapatite/TiO2 beads for dye photocatalytic degradation under ultraviolet light. Carbohydrate polymers, 224, 115138.
Mamba, G. & Mishra, A., 2016. Graphitic carbon nitride (g-C3N4) nanocomposites: a new and exciting generation of visible light driven photocatalysts for environmental pollution remediation. Applied Catalysis B: Environmental, 198, 347-377.
Mohamed, R., Mckinney, D. & Sigmund, W., 2012. Enhanced nanocatalysts. Materials Science and Engineering: R: Reports, 73, 1-13.
Pouretedal, H.R., Eskandari, H., Keshavarz, M.H., & Semnani, A., 2009. Photodegradation of Organic Dyes using Nanoparticles of Cadmium Sulfide Doped with Manganese, Nickel and Copper as Nanophotocatalyst. Acta Chimica Slovenica, 56.
Rajabi, H.R., Shahrezaei, F. & Farsi, M., 2016. Zinc sulfide quantum dots as powerful and efficient nanophotocatalysts for the removal of industrial pollutant. Journal of Materials Science: Materials in Electronics, 27, 9297-9305.
Royer, B., Cardoso, N.F., Lima, E.C., Vaghetti, J.C., Simon, N.M., Calvete, T. & Veses, R.C., 2009. Applications of Brazilian pine-fruit shell in natural and carbonized forms as adsorbents to removal of methylene blue from aqueous solutions—Kinetic and equilibrium study. Journal of Hazardous Materials, 164, 1213-1222.
Sadia, M., Ahmad, I., Ul-Saleheen, Z., Zubair, M., Zahoor, M., Ullah, R., ... & Zekker, I., 2023. Synthesis and characterization of MIPs for selective removal of textile dye acid black-234 from wastewater sample. Molecules, 28, 1555.
Sahoo, C. & Gupta, A., 2012. Optimization of photocatalytic degradation of methyl blue using silver ion doped titanium dioxide by combination of experimental design and response surface approach. Journal of Hazardous Materials, 215, 302-310.
Shan, A.Y., Ghazi, T.I.M. & Rashid, S.A., 2010. Immobilisation of titanium dioxide onto supporting materials in heterogeneous photocatalysis: A review. Applied Catalysis A: General, 389, 1-8.
Ullah Khan, A., Zahoor, M., Ur Rehman, M., Ikram, M., Zhu, D., Naveed Umar, M., ... & Ali, E.A., 2023. Bioremediation of azo dye Brown 703 by Pseudomonas aeruginosa: an effective treatment technique for dye-polluted wastewater. Microbiology Research, 14, 1049-1066.
Van Gerven, T., Mul, G., Moulijn, J. & Stankiewicz, A., 2007. A review of intensification of photocatalytic processes. Chemical Engineering and Processing: Process Intensification, 46(9), 781-789.
Wang, Q., Wang, W., Zhong, L., Liu, D., Cao, X., & Cui, F., 2018. Oxygen vacancy-rich 2D/2D BiOCl-g-C3N4 ultrathin heterostructure nanosheets for enhanced visible-light-driven photocatalytic activity in environmental remediation. Applied Catalysis B: Environmental, 220, 290-302.
Xue, H., Jiang, Y., Yuan, K., Yang, T., Hou, J., Cao, C., ... & Wang, X., 2016. Floating photocatalyst of B–N–TiO2/expanded perlite: a sol–gel synthesis with optimized mesoporous and high photocatalytic activity. Scientific Reports, 6(1), 29902.
Yang, S., Gong, Y., Zhang, J., Zhan, L., Ma, L., Fang, Z., ... & Ajayan, P.M., 2013. Exfoliated graphitic carbon nitride nanosheets as efficient catalysts for hydrogen evolution under visible light. Advanced Materials, 25(17), 2452-2456.
 Zeng, J., Peng, C., Wang, R., Liu, Y., Wang, X. & Liu, J., 2019. Large-scale synthesis of hierarchical SnO spheres assisted with poly (N-isopropylacrylamide) for high lithium storage capacity. Ceramics International, 45(1), 1246-1250.

Files

Share

How to cite

Statistics