Optimizing Library Facade Design in Zanjan Climate through Daylight Simulation and Metaheuristic Approaches

Document Type : Original Research Article

Authors

1 Department of Architecture, Qeshm Branch, Islamic Azad University, Qeshm, Iran

2 School of Architecture and Urban Planning, Iran University of Science and Technology, Tehran, Iran

3 Department of Architecture, Faculty of Architecture Engineering and Urban Design, Shahid Rajaee Teacher Training University, Tehran, Iran

Abstract

This research investigates the optimization of library facade design in Zanjan's climate, focusing on maximizing daylight utilization through metaheuristic approaches. By employing parametric and metaheuristic techniques, the study evaluates a range of facade elements, including window-to-wall ratios, light shelf depths, and glass transmittance, to identify optimal configurations that enhance indoor lighting while minimizing energy consumption. The findings reveal significant variations in useful daylight illuminance, ranging from 44.26% to 72.85% across different design options. Notably, the configuration with an interior depth of 1.3 meters, exterior depth of 0.6 meters, and a window-to-south-wall ratio of 0.4, coupled with a glass transmittance factor of 0.55, demonstrates the highest level of useful daylight. Furthermore, all design options exhibit excellent glare control, with glare-free percentages approaching 100%. The analysis suggests that interior depths between 0.9 and 1.3 meters, particularly 1.3 meters, are optimal for maximizing daylight penetration. Similarly, exterior depths between 0.5 and 0.7 meters, especially 0.6 and 0.7 meters, yield favorable results. These findings offer valuable insights for architects and engineers seeking to design energy-efficient and visually comfortable buildings in regions with similar climatic conditions.

Keywords

Main Subjects

References

Acosta, I., Campano, M.A., Dominguez, S. & Fernandez-Aguera, J., 2019. Minimum daylight autonomy: A new concept to link daylight dynamic metrics with daylight factors. Leukos, 15(4), 251-269.
Aguilar-Carrasco, M.T., Diaz-Borrego, J., Acosta, I., Campano, M.A., & Dominguez-Amarillo, S., 2023. Validation of lighting parametric workflow tools of Ladybug and Solemma using CIE test cases. Journal of Building Engineering, 64, 105608.
Ahmad, A., Prakash, O., Kumar, A., Hasnain, S.M., Verma, P., Zare, A. ... & Pandey, A., 2022. Dynamic analysis of daylight factor, thermal comfort, and energy performance under clear sky conditions for building: An experimental validation. Materials Science for Energy Technologies, 5, 52-65.
Alhagla, K., Mansour, A. & Elbassuoni, R., 2019. Optimizing windows for enhancing daylighting performance and energy saving. Alexandria Engineering Journal, 58(1), 283–290.
Altomonte, S., 2009. Daylight for energy savings and psycho-physiological well-being in sustainable built environments. Journal of Sustainable Development, 2(3), 3-16.
Aries, M.B.C., Aarts, M.P.J. & van Hoof, J., 2015. Daylight and health: A review of the evidence and consequences for the built environment. Lighting Research & Technology, 47(1), 6-27.
Baker, N. & Steemers, K., 2014. Daylight design of buildings: A handbook for architects and engineers. Routledge.
Bellia, L., Pedace, A. & Fragliasso, F., 2015. The role of weather data files in climate-based daylight modeling. Solar Energy, 119, 169-180.
Berardi, U. & Wang, T., 2014. Daylighting in an atrium-type high-performance house. Building and Environment, 76, 92-104.
Beute, F., 2014. Powered by nature: The psychological benefits of natural light (PhD thesis). Eindhoven University of Technology. https://doi.org/10.6100/IR774909
Boubekri, M., 2014. Daylighting design. Springer.
Boubekri, M., Cheung, I.N., Reid, K.J., Wang, C.H. & Zee, P.C., 2014. Impact of windows and daylight exposure on overall health and sleep quality of office workers: A case-control pilot study. Journal of Clinical Sleep Medicine, 10(6), 603-611.
Campano, M.A., Acosta, I., Dominguez, S. & Lopez-Lovillo, R., 2022. Dynamic analysis of office lighting smart controls management based on user requirements. Automation in Construction, 133, 104021.
Cantin, F. & Dubois, M.C., 2011. Daylighting metrics based on illuminance, distribution, glare, and directivity. Lighting Research & Technology, 43(3), 291-307.
Celik, T., & Inan, N., 2023. Daylight in library design and natural light distribution: Ostim Technical University Library. STAR Sanat ve Tasarım Araştırmaları Dergisi, 4(6), 70-89.
De Luca, F., Kiil, M., Kurnitski, J. & Murula, R., 2019. Evaluating daylight factor standard through climate-based daylight simulations and overheating regulations in Estonia. In Proceedings of the 16th IBPSA Conference. Rome, Italy, September 2-4, 2019.
Dimara, A., Krinidis, S., Ioannidis, D. & Tzovaras, D., 2023. Building performance simulation. In T. Lynn, P. Rosati, M. Kassem, S. Krinidis, & J. Kennedy (Eds.), Disrupting buildings (pp. 47-67). Palgrave Macmillan. https://doi.org/10.1007/978-3-031-32309-6_4
Dogan, T. & Park, Y.C., 2019. A critical review of daylighting metrics for residential architecture and a new metric for cold and temperate climates. Lighting Research & Technology, 51(2), 206–230.
Edwards, L. & Torcellini, P., 2002. A literature review of the effects of natural light on building occupants. National Renewable Energy Laboratory. https://www.nrel.gov/docs/fy02osti/30769.pdf
Ercan, B. & Elias-Ozkan, S.T., 2015. Performance-based parametric design explorations: A method for generating appropriate building components. Design Studies, 38, 33-53.
Erlendsson, O., 2014. Daylight optimization: A parametric study of atrium design (Master’s thesis). Royal Institute of Technology, School of Architecture and Built Environment, Stockholm, Sweden.
Farivar, S. & Teimourtash, S., 2023. Impact of window design on dynamic daylight performance in an office building in Iran. Journal of Daylighting, 10, 31-44.
Favoino, F., Overend, M. & Jin, Q., 2015. The optimal thermo-optical properties and energy-saving potential of adaptive glazing technologies. Applied Energy, 156, 1-15.
Feist, W., 2014. Active for more comfort: Passive house. International Passive House Association, Germany.
Freewan, A.A.Y. & Al Dalala, J.A., 2019. Assessment of daylight performance of advanced daylighting strategies in large university classrooms: Case study classrooms at JUST. Alexandria Engineering Journal, 59(2), 791–802.
Freewan, A.A. & Al Dalala, J.A., 2020. Assessment of daylight performance of advanced daylighting strategies in large university classrooms: Case study classrooms at JUST. Alexandria Engineering Journal, 59(2), 791-802.
Futrell, B.J., Ozelkan, E.C. & Brentrup, D., 2015. Bi-objective optimization of building enclosure design for thermal and lighting performance. Building and Environment, 92, 591-602.
Garcia-Fernandez, B. & Omar, O., 2023. Integrated innovative solar lighting system for optimization of daylight utilization for a public library in Alexandria, Egypt. Ain Shams Engineering Journal, 14, 101819.
Gentile, N., Lee, E.S., Osterhaus, W., Altomonte, S., Amorim, C.N.D., Ciampi, G. ... & Sibilio, S., 2022. Evaluation of integrated daylighting and electric lighting design projects: Lessons learned from international case studies. Energy and Buildings, 268, 112191.
Gherri, B., 2015. Assessment of daylight performance in buildings: Methods and design strategies. WIT Press.
Gordon, G., 2015. Interior lighting for designers (5th ed.). John Wiley & Sons.
Hashemi, A., 2014. Daylighting and solar shading performances of an innovative automated reflective louvre system. Energy and Buildings, 82, 607-620.
Heng, C.Y.S., Lim, Y.W. & Ossen, D.R., 2020. Horizontal light pipe transporter for deep plan high-rise office daylighting in tropical climate. Building and Environment, 179, 106645.
Hobday, R., 2015. Myopia and daylight in schools: A neglected aspect of public health. Perspectives in Public Health, 135(5), 248-249.
Kaminska, A., 2020. Impact of building orientation on daylight availability and energy savings potential in an academic classroom. Energies, 13(18), 4916.
Khavari, F., 2020. An empirical validation of daylighting tools: Assessing radiance parameters and simulation settings in Ladybug and Honeybee against field measurements. Solar Energy, 207, 1021-1036.
Kheiri, F., 2018. A review on optimization methods applied in energy-efficient building geometry and envelope design. Renewable and Sustainable Energy Reviews, 92, 897-920.
Kim, S.H., Park, S. & Yoon, J.H., 2014. A study on the purposes of energy analysis indicator by the window elements of office buildings in Korea. Energy and Buildings, 81, 153-165.
Lechner, N., 2014. Heating, cooling, lighting: Sustainable design methods for architects (4th ed.). John Wiley & Sons.
Li, D.H., 2010. A review of daylight illuminance determinations and energy implications. Applied Energy, 87(7), 2109-2114.
Li, D.H.W., 2010. A review of daylight illuminance determinations and energy implications. Applied Energy, 87(7), 2109-2118.
Li, D.H.W. & Lam, J.C., 2001. Evaluation of lighting performance in office buildings with daylighting controls. Energy and Buildings, 33(8), 793-803.
Li, D.H.W. & Lam, J.C., 2003. An investigation of daylighting performance and energy saving in a daylit corridor. Energy and Buildings, 35(4), 365-373.
Li, W., Wang, R., Zhang, T., Ming, M. & Li, K., 2020. Reinvestigation of evolutionary many-objective optimization: Focus on the Pareto knee front. Information Sciences, 522, 193–213.
Lopez-Cabeza, V. P., Diz-Mellado, E., Rivera-Gomez, C., Galan-Marin, C. & Samuelson, H.W., 2022. Thermal comfort modeling and empirical validation of predicted air temperature in hot-summer Mediterranean courtyards. Journal of Building Performance Simulation, 15(1), 39-61.
Mahdavi, A., 2020. In the matter of simulation and buildings: Some critical reflections. Journal of Building Performance Simulation, 13(1), 26–33.
Mahdavi, A., Inangda, N. & Rao, S.P., 2015. Impacts of orientation on daylighting in high-rise office buildings in Malaysia. Journal of Design and Built Environment, 15(2), 29-38.
Mangkuto, R.A., Fela, R.F. & Utami, S.S., 2019. September). Effect of façade thickness on daylight performance in a reference office building. In Proceedings of the Building Simulation. https://doi.org/10.26868/25222708.2019.210677
Mardaljevic, J., 2013. Rethinking daylighting and compliance. Journal of Sustainable Design & Applied Research, 1(1), 15-25.
Nadiri, P., Kharvari, F. & Salah, V., 2019. Optimization of building façade to control daylight excessiveness and view to outside. Journal of Applied Engineering Sciences, 9(2), 139-148.
Nair, M.G., Ramamurthy, K. & AR, G., 2014. Classification of indoor daylight enhancement systems. Lighting Research & Technology, 46(2), 245‐267.
Nasrollahi, N. & Shokry, E., 2020. Parametric analysis of architectural elements on daylight, visual comfort, and electrical energy performance in study spaces. Journal of Daylighting, 7, 57-72.
Nedhal, A.T., Syed, F.S.F. & Adel, A., 2016. Relationship between window-to-floor area ratio and single-point daylight factor in varied residential rooms in Malaysia. Indian Journal of Science and Technology, 9(33), 1-8.
Picker, C., 2024. Color Picker for Radiance. Retrieved from,http://www.jaloxa.eu/resources/radiance/colour_picker/index.shtml (Last accessed: March 11, 2024).
Pilechiha, P., Mahdavinejad, M., Rahimian, F.P., Carnemolla, P. & Seyedzadeh, S., 2020. Multi-objective optimisation framework for designing office windows: Quality of view, daylight and energy efficiency. Applied Energy, 261, 114356.
Reinhart, C.F., 2014. Daylighting handbook: Fundamentals, designing with the sun. Selbstverlag.
Reinhart, C.F., 2019. Daylight performance predictions. In Building performance simulation for design and operation (2nd ed.). Routledge. https://doi.org/10.4324/9781315657136
Ritter, F., Geyer, P. & Borrmann, A., 2015. Simulation-based decision-making in early design stages. In Proceedings of the 32nd International CIB W78 Conference (pp. 1-12). Eindhoven, Netherlands.
Sankaewthong, S., Horanont, T., Miyata, K., Karnjana, J., Busayarat, C. & Xie, H., 2022. Using a biomimicry approach in the design of a kinetic façade to regulate the amount of daylight entering a working space. Buildings, 12(12), 2089.
Schregle, R., Grobe, L.O. & Wittkopf, S., 2015. Progressive photon mapping for daylight redirecting components. Solar Energy, 122, 327-336.
Sener, F. & Kale, A.K.Y., 2003. Investigation of library buildings from visual comfort point. Istanbul Technical University, Faculty of Architecture.
Hu, H., Zhang, H., Wang, L. & Ke, Z., 2023. Evaluation and design of parameterized dynamic daylighting for large-space buildings. Sustainability, 15(14), 10773.
U.S. Green Building Council., 2014. LEED v4 for building design and construction. USGBC Inc. https://www.usgbc.org/leed/v4.
Vaisi, S. & Kharvari, F., 2019. Evaluation of daylight regulations in buildings using daylight factor analysis method by Radiance. Energy for Sustainable Development, 49, 100–108.
Velux., 2014. Daylight, energy and indoor climate: Basic book (pp. 32-47). VELUX Group.
Yao, J., 2014. An investigation into the impact of movable solar shades on energy, indoor thermal, and visual comfort improvements. Building and Environment, 71, 24-32.
Yi, Y.K., 2019. Building facade multi-objective optimization for daylight and aesthetical perception. Building and Environment, 148, 459–472.
Yu, X., Su, Y. & Chen, X., 2014. Application of RELUX simulation to investigate energy saving potential from daylighting in a new educational building in the UK. Energy and Buildings, 74, 191-202.
Zamani, M., Akbari, H. & Hadavi, F., 2016. Best orientation determination of buildings in Zanjan city based on solar radiation. Armanshahr Architecture & Urban Development, 9(16), 85-94.
Zhu, L., Wang, B. & Sun, Y., 2020. Multi-objective optimization for energy consumption, daylighting, and thermal comfort performance of rural tourism buildings in North China. Building and Environment, 176, 106841.

Files

Share

How to cite

Statistics